Munro Wundercutt10 Hollower

“I’ve been into woodturning for just over ten years. I’ve used several hand-held hollowing tools in my quest to find the perfect tool. After using the Munro Wundercutt10 a few times, I can say that it is hands-down the best hand-held hollowing tool. Mr. Munro paid careful attention to detail in the design phase. Positive stops prevent creeping of the tool from the user-set position, depth-of-cut control is very easy and precise, and a negative rake reduces any tendency to grab. Catches are virtually non-existent with this tool. It’s most definitely one of the smartest tool purchases I’ve made.”

M. Pruitt

This new tool from Rolly Munro is the latest design from this world class woodturner/toolmaker. Rolly has refined the tool further by redesigning the cutter holder to allow for easier setting of the depth gauge (cut limiter).
He also gave the cutter holder a negative rake to improve control of the tool. The cutter holder attaches to the adjustable link with a new indexing feature that keeps it from moving while it is tightened.

The Wundercutt10 Hollowing Tool features a 10mm (3/8″) carbide cutter to give many hours of cutter life before being replaced.
The cutter can be rotated several times to expose a fresh cutting edge to give maximum life. Some people replace it and others use the sharpening mandrel included to sharpen it with a diamond hone.
The tool has a 5/8″ diameter stainless steel shaft that is 15-1/2″” long. It fits into the 1-1/2″ by 19-1/2″ handle and can be adjusted to the best length needed for the turning at hand.

The Wundercutt10 Tool includes: 3/8″ carbide cutter, adjustable cut limiter, one connecting link, 5/8″ x 15-1/2″ shank, 19-1/2″ handle, wrenches and instruction manual.